SINCE 2011
ABOUT US
Chongqing Suya Technology Co., Ltd. is a technology-based backbone enterprise specializing in the production and sales of fire protection, ventilation, and refrigeration equipment for various civil buildings and industrial and mining enterprises. It has been awarded the Compulsory Product Certification (CCC), the Type Inspection Report of the Fire Protection Building Material Quality Supervision and Inspection Center, the Quality Management System Certification (GB/TI9001-2016/TSO 9001:2015), and the Environmental Management System Certification (ISO14001).
Registered capital: 18 million yuan
Professional team talents
Project satisfaction
PRODUCTS
──
The roof ventilator mainly consists of the following parts: roof ventilator frame, rain shield, peripheral protective plate, valve plate and electric switch mechanism, drainage ditch, flashing, etc.
Inorganic fiberglass ducts, galvanized ducts
Our company utilizes a new formula to produce inorganic non combustible fiberglass ventilation pipes, flat plates, and bridge inner liners. The products have excellent characteristics such as surface cracking resistance, water resistance, brittleness resistance, impact resistance, tensile resistance, high temperature resistance, corrosion resistance, cold melt resistance, and non flammability.
PYHL-14A high-efficiency axial flow fire smoke exhaust fan
The PYHL-14A high-efficiency axial flow fire smoke exhaust fan is improved based on the HL3-2A fan and adopts a high-temperature resistant motor, equipped with a dedicated motor cooling system.
In the process of modernization construction, with the rapid development of industrial production, science and technology, and cultural tourism, people's demands for a clean and comfortable working and living environment are also increasing. In order to prevent outdoor cold and hot air from entering and indoor air pollution from spreading,
HTF series axial flow fire smoke exhaust fan
The design of the HTF axial flow smoke exhaust fan is unique, with a fully enclosed high-temperature motor built-in and equipped with a dedicated motor cooling system. The axial flow and mixed flow impeller structures are optimized using CAD software with multiple objectives.
HL3-2A Efficient Low Noise Mixed Flow Fan
HL3-2A mixed flow fan is used for ventilation and air exchange; Suitable for underground parking lots, underground buildings, Longdao and other places. It has the characteristics of high efficiency, energy conservation, low noise, and convenient installation.
HTFC centrifugal fire smoke exhaust fan
The HTFC series centrifugal fire smoke exhaust fan is a one machine dual-purpose, high-efficiency, and low-noise cabinet centrifugal fan developed by our company. It has obvious advantages such as low noise, excellent high-temperature resistance, novel and compact structure, small vibration, light weight, and easy installation and maintenance.
YA type residual pressure valve
In order to meet the urgent needs of ventilation and air conditioning engineering in China and achieve zero energy consumption automatic control of positive pressure in air-conditioned rooms, the 11th Design and Research Institute of the Ministry of Electronic Industry has filled the gap in the project of automatic control of indoor positive pressure with residual pressure valves designed and produced by our company based on similar foreign products. This product has the advantages of tight closure, sensitive response, convenient adjustment, beautiful appearance, and no energy consumption.
T308-1 Closed Split Multi leaf Air Volume Regulating Valve
Applicable: Multi leaf air volume regulating valve, generally used in air conditioning ventilation system pipelines to regulate the air volume of branch pipes, and can also be used for mixed regulation of fresh air and return air.
The RSVCAVC type constant air volume regulator is a mechanical constant air volume regulation device that does not require external power supply during operation. When the air flow passes through the valve plate, the built-in airbag generates a torque to close the air duct and balances the opening torque of the cam adjustment mechanism
WT and WS series fiberglass centrifugal roof fans
This second series roof fan uses Y series motors and is suitable for general ventilation places with no high requirements for noise indicators. Roof fans come in various specifications and forms, with a wide range of applications, and can meet different requirements for usage scenarios, air volume, pressure, and noise.
A diagonal flow fan, also known as a mixed flow fan, is a fan located between an axial flow fan and a centrifugal fan. The impeller of the diagonal flow fan allows the air to undergo both centrifugal and axial movements, and the movement of the air inside the shell mixes the two forms of motion: axial and centrifugal.
GDF series centrifugal pipeline fan
The GDF series centrifugal duct fan is a forward multi wing centrifugal fan with good performance, smooth operation, low noise, reasonable and compact structure, convenient installation, square inlet and outlet. It can be used as a substitute for similar foreign products.
The T35-11 series axial flow fan is a new type of fan designed and improved on the basis of T30-11. It has higher efficiency, lower noise, and more reasonable structure than T30-11 fans. This series of fans is widely used for ventilation or strong heating in general factories, warehouses
DZ series low-noise axial flow fan
The DZ series low-noise axial flow fan is a new type of axial flow fan. It has the characteristics of high efficiency, low noise, smooth operation, and convenient installation. The blades can be made of materials such as aluminum alloy, ABS engineering plastic, FRP fiberglass, etc. as needed. This series of products is widely used for wall exhaust, post ventilation, and roof ventilation in industrial and mining enterprises and civil buildings.
BDW-87-4 type fiberglass low noise centrifugal roof fan
The BDW-87-4 (also known as BDW4-75-12) series fan uses an externally rotating motor and stepless speed regulation, suitable for high pressure and low noise ventilation areas.
BDW series fiberglass roof fan
This series of fans uses YSF series motors, suitable for ventilation places with high air volume and low noise.
The DWT series roof fans are divided into two types. Firstly, axial flow roof fan: model DWT-1 is suitable for use in medium and low pressure, high flow situations. Secondly, centrifugal roof fans: available in two types: DWT-lI and DWT-II, are suitable for situations with low air volume and high pressure requirements.
Diagonal flow fans are widely used in pipeline pressurization, air supply and exhaust, as well as ventilation and exchange places in high-rise buildings and public buildings. The characteristics of a diagonal flow fan include a flow rate greater than that of a centrifugal fan, a total pressure higher than that of an axial flow fan, and a volume smaller than that of a centrifugal fan.
SWF series mixed flow fan (positive pressure supply fan)
Compact structure, easy installation, low noise, and wide applicability are widely used in the supply and exhaust systems of public buildings, civil buildings, and industrial and mining enterprises.
Trough type cable tray, also known as trough type cable tray, is a fully enclosed cable tray. It is most suitable for laying computer cables, communication cables, thermocouple cables, and other highly sensitive control cables. It has good effects on shielding interference and protecting cables in heavily corrosive environments.
Tee, also known as pipe fittings or tee fittings, tee joints, etc. Mainly used to change the direction of the fluid, used at the branch of the main pipeline. It can be classified by pipe diameter size. Generally made of materials such as carbon steel, cast steel, alloy steel, stainless steel, copper, aluminum alloy, plastic, argon carbide, PVC, etc.
Vertical equal diameter tee at the top corner
Equal diameter tee is a type of tee. The three pipes of an equal diameter tee have equal diameters.
ADVANTAGE
01
Strength
The company has experienced technical personnel, is a professional engaged in silicone, die-cutting, plastic mold design and assembly as one of the service companies.
02
The product quality is reliable
Our company is equipped with a complete product monitoring system and industrial environment monitoring system, a professional marketing team and a perfect after-sales service system.
03
Prompt response
Our company ships quickly, and does a good job of product inspection before shipment to ensure product quality and build a high-quality brand.
04
After-sales service is guaranteed
We strive to serve customers, serve the society, and serve everyone is a foothold of our development. We not only provide good products, but also ensure thoughtful service, and we always do our best to provide customers with as much added value as possible
NEWS
Focus on Suya Technology and understand the industry information trends
Congratulations on the official launch of Chongqing Suya Technology Co., Ltd. website!
2021-09-24
The 3rd China (Southern) Refrigeration Equipment Exhibition in 2022
2021-09-24
What is ventilation equipment?
2021-09-24
Unlocking Comfort: The Magic of Air Outlet Diffusers in Your Home
2025-04-27